How to clean the imported bearing?

How to clean the imported bearing?

Soft thin oil or antirust treatment paste hard bottomed bearing shall be immersed in hot automobile oil at 100-200 ℃, hold the bearing with pointed nose pliers, and clean the oil stains on the bearing with a brush. When the soft thin oil or antirust treatment paste is heated to 100-200 ℃, it melts and is very easy to flush out from the system loophole of the bearing.

Inadvertently shake the bearing in the oil for several times. The oil stains will also flow away from the loopholes in the system (the roller bearing, bead holder, inner ring line and second ring road should also be loosened when cleaning). Put the bearing into the lighter oil and soak for 5-10 minutes. Squeeze the inner ring line with one hand and rotate the second ring road with the other hand, and the thin oil or antirust treatment paste on the bearing will flow out.

Then put the bearing into the cleaner lighter oil, clean it with the brush of gold jewelry, clean the oil stains in the steel ball and system loopholes, and then put it into the vehicle gasoline for cleaning once, remove it and put it on a clean paper.