Ways to reduce your losses in the application of precision bearings

In order to save your expenses and reduce your losses and troubles, here we summarize several points for attention in the application of precision bearings:

1. Regular maintenance and inspection shall be carried out during use, and more attention shall be paid during installation. In particular, installation, disassembly, cleaning and process testing methods need to be carried out in a strict way.

2. When installing and disassembling precision bearings of different types and sizes. The tools used are different from the installation methods, including mechanical ones and hydraulic ones. The bearing shall be installed in a clean and dust-free room. The bearing shall be carefully selected and matched. The bearing shall be cleaned before installation. When cleaning, the inner ring slope shall be upward, and the hand induction shall be flexible without stagnation. After drying, the specified amount of grease shall be put in. In case of oil mist lubrication, a small amount of oil mist oil shall be put in. Special tools shall be used for bearing installation, with even stress and no knocking. The bearing shall be stored Clean and ventilated, no corrosive gas, relative humidity no more than 65%, long-term storage should be regular rust.

3. Cleaning is also very important for precision bearings. The influence of contamination on the precision of precision bearings is very obvious. If the smooth surface of the ball is polluted, the bearing steel will be under local pressure due to the excessive rolling of the rolling elements, which will cause the permanent material fatigue of the bearing. In addition, the dust in the external environment will damage the precision bearing, so it is necessary to ensure a clean and tidy working environment when applying.